锐客网

  1. 首页 > 睿知 > >

爱普生l360废墨仓垫更换

经验分享睿知

I. Preparatory work
1. Disconnect the power supply and data cable;
【爱普生l360废墨仓垫更换】2. Turn off the printer and remove the toner cartridge;
3. Remove the used waste ink box from the printer;
4. Clean the waste ink tank and the interior of the printer.
II. Replacement process
1. Take out a new waste ink tank and remove the protective film on the surface;
2. Put the waste ink tank into the printer from the back and make sure it fits properly;
3. Connect the power supply and data cable, then turn on the printer;
4. Install the toner cartridge and clean up the debris;
5. Wait for the printer to finish initializing, then start the print test.
III. Conclusion
After replacing the waste ink tank of Epson L360 printer, the maintenance work is completed. If the printer has no abnormality during the print test, the replacement is successful. If there is any abnormality, it may be caused by improper installation of the waste ink tank. In this case, you should carefully check whether the installation is correct and make sure that the waste ink tank fits well.

    推荐阅读


    上一篇：爱普生1500如何清零

    下一篇：爱普生85nd更换废墨仓