【佳能打印机废墨收集器清零】Canon printers have an onboard waste ink collector that can be reset from time to time. The waste ink collector collects the ink that is used during the printing process and prevents it from leaking out of the printer. This is a necessary feature for keeping your printer functioning properly and avoiding costly repairs.
In order to reset the waste ink collector on your Canon printer, you must first turn off the printer. Next, locate the waste ink collector on the printer. On some printers, it is located under the printer platen. Once you locate the waste ink collector, press and hold the reset button on the back of the printer. While holding the reset button, turn the printer back on. The printer should indicate that it is resetting the waste ink collector.
Once the waste ink collector has been reset, it should be free of any excess ink and ready to be used again. You should repeat this process whenever the waste ink collector becomes full or when your printer stops functioning properly. Keep in mind that resetting the waste ink collector too often can also cause problems with your printer. If you reset it too many times, you may end up needing to replace the waste ink collector.
It is recommended that you empty and clean the waste ink collector every few months to prevent any overflow from occurring and to ensure that your printer is functioning properly.
推荐阅读
- 佳能的清零软件下载
- canon ip2880墨盒清零软件
- 佳能288清洗废墨
- 出错5b00
- 佳能ip1000清零软件
- 佳能mp198 清零软件
- 佳能打印机ts8080故障代码5B00
- 佳能打印机清零后无法使用
- 弘通